FR-210N BOPP Tape Slitting Machine | How To Manufacture Adhesive Tape?

Key Feature of FR-210N BOPP Tape Slitting Machine

1. Fully Automatic Four-Shaft Exchange: Independently driven shafts enable simultaneous operations—two shafts handle tape slitting and rewinding, while the other two allow for paper core loading and finished tape unloading, significantly boosting efficiency.

2. Advanced Control System: Equipped with Japan Mitsubishi PLC control system and user-friendly HMI operation for precision and ease of use.

3. Unwinding Tension Control: Utilizes a powder brake system for stable and accurate tension during unwinding.

4. Wrinkle Elimination: A banana roller is integrated to effectively remove tape wrinkles during extension and feeding.

5. Edge Trim Disposal: Features a spool trim winder for collecting edge trims.

6. Automatic Labeling: Includes a built-in automatic labeling function for enhanced productivity.

7. Accessory Machines: Comes with a complete set of supporting equipment, including FR-203 Paper Core Cutting Machine, FR-103 Paper Core Loading Machine, FR-200 Mini Rewinding Machine, and one set of aluminum mould for size setting.

BOPP Tape Production Process (For example: 48mm Wide × 50m Long )

1. Cutting Paper Cores

• Cut the paper core into 48mm widths.

2. Loading Paper Cores

• Place the 48mm paper cores onto the slitting machine’s rewind shafts.

3. Slitting & Rewinding

• Set the required parameters on the slitting machine touch screen.

• Begin the slitting and rewinding process to produce 50m-long BOPP tapes.

4. Unloading & Reloading

• Remove the finished 48mm × 50m BOPP tapes from the rewind shafts.

• Simultaneously, load new 48mm paper cores onto the rewind shafts for continuous production.

During production, defective tapes may occur. To minimize waste, we use the FR-200 mini rewinding machine to rewind and fix these tapes, ensuring only high-quality products are delivered.

FR-210N Slitting Mahcine Optional Items

1. Low-noise roller or noise hood

2. Hydraulic auto uplifter for jumbo roll loading on the unwinder

Main Technical Parameters

FAQ

1. What else do I need to prepare for starting a BOPP tape business?

To begin, you will need the following:

• BOPP tape jumbo rolls

• Paper cores (or produce paper cores)

• A forklift for material handling

• An air compressor for machine operation

2. What is the production capacity?

The production capacity depends on the slitting length and the operator’s skill level. For example, if the machine slits 50 meters per cycle, the cycle time will be around 65 seconds. Exact capacity estimates can be provided based on your specific requirements.

3. How many workers are required?

We recommend 2 operators to efficiently manage the four machines.

4. How do I change the tape size or width?

For each tape size or width, you will need to replace one set of aluminum molds. Each set includes:

• Spacer for the slitting machine

• Spacer for the core cutting machine

• Aluminum mold for the paper core loading machine