Availability: | |
---|---|
Quantity: | |
FD1P-16
Furimach
82089000
Specification | OD | ID | Thickness | Edge |
180*25.4*2.0 | 180 | 25.4 | 2.0 | D/E, S/E |
160*25.4*2.0 | 180 | 25.4 | 2.0 | D/E, S/E |
Features: Sharp but low toughness, brittle, easy to break under impact (wrong angle will also cause breakage), excellent wear resistance, material is not easy to rust, high cost but long service life, not suitable for cutting hard materials.
Sharpening: Only diamond grinding wheel/disc can be used.
Parameter settings for tungsten steel blade:
Spindle speed: 500RPM
Circular knife speed: 0 (not rotating) -100RPM (Max. 100RPM)
[When the shaft speed exceeds 500RPM, the circular blade must be passive.
Because the tungsten steel blade is brittle, it is easy to break if it is not synchronized]
Three-stage speed setting for tungsten steel blade:
Contact speed: 7-8
Cutting speed: do not exceed 5
Tube cutting speed: do not exceed 5